24HS39-4204D-B200 Discontinued
Same series
| Model | Price | Stock | ||||
|---|---|---|---|---|---|---|
| 24HS39-4204D-B200 Discontinued | — | — | — | — | — | |
| 24HS40-5804D-E1000 Discontinued | — | — | — | — | — |
Nema 24 Stepper 4.0Nm(566 oz.in) w/ Brake Friction Torque 2.0Nm(283oz.in)
-
Motors & Drivers
-
Linear Motion
-
Gearboxes
- Electrical
- Mechanical
-
New Product
New Categories Arrived in October
Nema 24 Stepper 4.0Nm(566 oz.in) w/ Brake Friction Torque 2.0Nm(283oz.in)
This professional CNC Switching 350W 24V power supply can be widely used in Industrial Automation and CNC Stepper/Servo System.
115V and 230V c..
from
C$37.29
Pre-order
This professional 350W 9.8A Switching CNC 36V Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo System. ..
from
C$37.29
🔥 Bestseller
The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced stepper control technology, this stepper driver is ..
from
C$33.23
This MRVR030 series worm gearbox, with a gear ratio of 25 and an input shaft diameter of 9mm, is suitable for all standard IEC motors with frame 56B14..
from
C$0.00
🔥 Bestseller
This is the shortest bipolar Nema 17 stepper motor we have, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x21.5mm. It has 4 wire..
from
C$11.59
🔥 Bestseller
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with hold..
from
C$19.39
Motor Specification
Manufacturer Part Number: 34HS46-5004D-E1000
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque: 8.5Nm(1204oz...
from
C$0.00
Encoder Specification
Output Circuit Type: Push-Pull (Single-Ended)
Controlled By: Encoder Interface
Encoder Resolution: 1000PPR
Output Signal C..
from
C$38.87
