Dual Shaft Nema 17 Unipolar 0.9deg 16Ncm(22.66oz.in) 0.3A 42x42x34mm 6 Wires
- Shaft Length(mm)
- 20
- Single Shaft/Dual Shaft
- Dual Shaft
- Holding Torque(Ncm)
- 16
- Rated Current(A)
- 0.31
C$13.72
As low as C$11.46
Pre-order
Stock: Pre-order
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16..
from
C$13.72
As low as C$11.46
Nema 17 Unipolar 0.9deg 16Ncm(22.66oz.in) 0.3A 42x42x34mm 6 Wires
- Shaft Length(mm)
- 20
- Single Shaft/Dual Shaft
- Single Shaft
- Holding Torque(Ncm)
- 16
- Rated Current(A)
- 0.31
C$13.95
As low as C$11.64
Pre-order
Stock: Pre-order
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16..
from
C$13.95
As low as C$11.64
Nema 17 Unipolar 0.9deg 26Ncm(36.82oz.in) 0.4A 42x42x39mm 6 Wires
- Shaft Length(mm)
- 24
- Single Shaft/Dual Shaft
- Single Shaft
- Holding Torque(Ncm)
- 26
- Rated Current(A)
- 0.4
C$14.66
As low as C$12.24
Stock: In Stock
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 26N..
from
C$14.66
As low as C$12.24
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm(45.3oz.in) 0.4A 42x42x48mm 6 Wires
- Shaft Length(mm)
- 24
- Single Shaft/Dual Shaft
- Dual Shaft
- Holding Torque(Ncm)
- 32
- Rated Current(A)
- 0.4
C$16.54
As low as C$13.82
Pre-order
Stock: Pre-order
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 32N..
from
C$16.54
As low as C$13.82
Showing 1 to 4 of 4 (1 Pages)
