Nema 14 Unipolar 1.8deg 10Ncm(14.16oz.in) 0.4A 35x35x34mm 6 Wires
- Output Shaft Type
- D
- Shaft Diameter(mm)
- 5
- Shaft Length(mm)
- 24
- No. of Lead
- 6
C$12.30
As low as C$10.27
Pre-order
Stock: Pre-order
This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A, with holding torque 10Ncm(14.2o..
from
C$12.30
As low as C$10.27
Nema 16 Unipolar 1.8deg 8Ncm(11.33oz.in) 0.5A 39x39x20mm 6 Wires
- Output Shaft Type
- O
- Shaft Diameter(mm)
- 5
- Shaft Length(mm)
- 19
- No. of Lead
- 6
C$11.82
As low as C$9.87
Stock: In Stock
This unipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 6 wires, each phase draws 0.5A, with holding torque 8Ncm(11.33o..
from
C$11.82
As low as C$9.87
Nema 17 Unipolar 0.9deg 16Ncm(22.66oz.in) 0.3A 42x42x34mm 6 Wires
- Output Shaft Type
- D
- Shaft Diameter(mm)
- 5
- Shaft Length(mm)
- 20
- No. of Lead
- 6
C$13.95
As low as C$11.64
Pre-order
Stock: Pre-order
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16..
from
C$13.95
As low as C$11.64
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm(127.5oz.in) 1A 57x57x56mm 6 Wires
- Output Shaft Type
- D
- Shaft Diameter(mm)
- 8
- Shaft Length(mm)
- 20.35
- No. of Lead
- 6
C$22.69
As low as C$18.95
Stock: In Stock
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5..
from
C$22.69
As low as C$18.95
Dual Shaft Nema 23 CNC Stepper 3.1Nm(439oz.in) 60x60x88mm 8 Wires
- Output Shaft Type
- D
- Shaft Diameter(mm)
- 8
- Shaft Length(mm)
- 24
- No. of Lead
- 8
C$48.24
As low as C$40.28
Stock: In Stock
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, wit..
from
C$48.24
As low as C$40.28
Showing 1 to 5 of 5 (1 Pages)
