Hot
Model: 17HS19-0854S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws current 0.85A at 5.3V, with holding torque 44Ncm(62.3oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-0854S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Hold..
C$15.45
Hot
Model: 17HS19-1684D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). It's very good choice for 3D printer, a rear shaft is available.
Electrical Specification
Manufacturer Part Number: 17HS19-1684D
Motor..
C$15.45
Hot
Model: 17HS19-1684S1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm(63.74oz.in). It's very good choice for 3D printer.
Electrical Specification
Manufacturer Part Number: 17HS..
C$15.45
Hot
Model: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A at 2.8V, with holding torque 59Ncm(83.55oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-2004D
Motor Type: Bipolar Stepper
Step Angle: ..
C$15.45
Hot
Model: 17HS19-2004S2
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, ..
C$15.84
Model: 17HS19-2504S
This Nema 17 bipolar stepper motor features a step angle of 1.8 degrees and compact dimensions of 42x42x48mm.
It is equipped with 4 wires, delivers 2.5A per phase, and provides a holding torque of 60Ncm(84.97oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-2504S
Motor..
C$14.73
Showing 1 to 6 of 6 (1 Pages)
