-2-200x160w.jpg "External (Acme) Linear Stepper Motor")
Hot
Model: 17HS26-2304S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x67mm. It has 4 wires, each phase draws 2.3A, with holding torque 79Ncm(111.896oz.in).
Electrical Specification
Manufacturer Part Number: 17HS26-2304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 79..
C$34.22
Model: iCL57-RS13
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
C$131.10
Model: 11HS12-0674D1-PG5
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. A 3.9mm diameter rear shaft with screw holes on rear endcap is available. It's a good solution to applications that with limited space but need low speed and/or high torque.Electri..
C$51.03
Model: iCL57-23
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
C$118.30
Model: 11HS12-0674D2-PG5
This Nema 11 stepper motor with 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674D2-PG5
Motor Type: Bipola..
C$51.03
Model: 18HR06-1004S
This bipolar pancake Nema 18 stepper motor with step angle 1.8deg and size Φ46x16mm. It has 4 wires, each phase draws 1A, with holding torque 9Ncm(12.75oz.in).
Electrical Specification
Manufacturer Part Number: 18HR06-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 9..
C$29.61
Model: iCL57-RS23
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
C$139.93
Model: 11HS12-0674S-PG5
This Nema 11 single shaft stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674S..
C$49.36
Hot
Model: 23HS16-0884S
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 0.88A, with holding torque 0.6Nm(84.97oz.in).
Electrical Specification
Manufacturer Part Number: 23HS16-0884S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.6Nm..
C$22.61
Model: 23HS16-2804D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm(77.88oz.in), a rear shaft is made for encoder or equals.
Electrical Specification
Manufacturer Part Number: 23HS16-2804D
Motor Type: Bipolar Stepp..
C$20.28
Model: iCLD57-21
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.1Nm(297.38oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
C$122.71
Model: 11HS12-0674D-PG14
This Nema 11 stepper motor with 32mm body and 0.67A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674D-PG14
Motor..
C$51.03
