Model: 24HR04-1004S
This bipolar pancake Nema 24 stepper motor with step angle 1.8deg and size Φ60x9.6mm. It has 4 wires, each phase draws 1A, with holding torque 6Ncm(8.5oz.in).
Electrical Specification
Manufacturer Part Number: 24HR04-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 6N..
C$34.10
Model: 14HS13-1004S-EGS20
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly imp..
C$83.96
Model: 17HS19-1504H
Electrical Specification
Manufacturer Part Number: 17HS19-1504H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.36Nm(51oz.in)
Rated Current/phase: 1.5A
Phase Resistance: 1.56ohms± 10%
Inductance: 1.9mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
C$25.53
Hot
Model: 17HS19-1684D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). It's very good choice for 3D printer, a rear shaft is available.
Electrical Specification
Manufacturer Part Number: 17HS19-1684D
Motor..
C$15.14
Model: 14HS13-1004S-EGS45
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 45:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly imp..
C$83.96
Model: 14HS13-1004S-EGS100
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly im..
C$83.96
Hot
Model: 17HS19-1684S1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm(63.74oz.in). It's very good choice for 3D printer.
Electrical Specification
Manufacturer Part Number: 17HS..
C$15.14
Hot
Model: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A, with holding torque 59Ncm(83.55oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-2004D
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
..
C$15.14
