Model: CL86RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save ad..
C$181.64
Model: 4-DM542Y-S19
This CNC kit includes:
4 x 23HS30-2804S2: Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
4 x DM542Y: Y Series Digital Stepper Driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 Stepper Motor
1 x S-500-48: 500W 48V 10.5A 115/230V Switching Power Supply
Motor Spec..
C$209.95
Model: 4-DM556Y-S30
This CNC kit includes:
4 x 23HS39-5004S: Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
4 x DM556Y: Y Series Digital Stepper Driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 Stepper Motor
2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor ..
C$230.91
Hot
Model: ISD02
The ISD02 is a parallel port control series of miniature high performance stepper motor drivers. Its biggest feature is its small size and strong driving ability. Its thickness is less than 14mm. They can be directly mounted onto NEMA 17 series stepper motors with the corresponding flange. ISD02 can..
C$43.80
Model: 4-DM860Y-TR48
This CNC kit includes:
4 x 34HS30-6004S: S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
4 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR1000-A70-A220: 1000VA Single-phase Square Control Transformer 220VAC to 4 ..
C$352.80
Model: ISC02
The ISC02 is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With ISC02, the motor speed can be controlled by an analog voltage. It is simple, stable and low cost. ISC02 can provide 0 - 2..
C$47.79
Model: 4-DM860Y-TR80
YS Series 4 Axis Stepper CNC Kit 8.0Nm(1132.89oz.in) Nema 34 Stepper Motor & Driver & AC Transformer
This CNC kit includes:
4 x 34HS39-6004S: S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
4 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR1000-A70-A220: 1000VA Single-phase Square Control Transformer 220VAC to 4 x 70VA..
C$377.57
Hot
Model: ISD04
The ISD04 is a parallel port control series of miniature high performance stepper motor drivers.Its biggest feature is its small size and strong driving ability.Its thickness is less than 14mm.They can be directly mounted onto NEMA 17, 23 series stepper motors with the corresponding flange.ISD04 can..
C$67.70
