Model: CL42Y-V20
The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2A and an operating voltage of 24–50VDC, making it ideal for Nema 17 stepper motors. As an upgraded successor to the CL42Y, it features a 5V/24V logic voltage selector and replaces the USB port with an..
C$52.55
Model: 3-DM860Y-TR48
This CNC kit includes:
3 x 34HS30-6004S: S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
3 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR800-A70-A220: 800VA Single-phase Square Control Transformer 220VAC to 3 x ..
C$273.60
Model: 34HS39-6004D-E1K-1M5
This is a Nema 34 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 6.0A, a holding torque of 6.50Nm(920.48oz.in) and 1500mm long cables. Compared to open loop stepper motors, it offers higher precision, higher torque, lower motor heating, lower power consumption..
C$65.80
Hot
Model: CL57Y
This is Y series closed loop stepper driver 0-7.0A 24-50VDC for Nema 17, 23, 24 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than ..
C$44.07
Model: CL57EC
The CL57EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 24-50VDC input, adjustable current up to 7.2A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple digital i..
C$86.43
Model: CL57Y-V20
The CL57Y-V20 is an enhanced version of the CL57Y closed-loop stepper driver, designed to deliver greater versatility and ease of use. Key improvements include a selectable 5V/24V logic voltage selector, an RS232 debugging port (replacing the USB interface), and more stable 3.3V pulse signal recepti..
C$48.60
Model: 3-DM860Y-TR80
YS Series 3 Axis Stepper CNC Kit 8.0Nm(1132.89oz.in) Nema 34 Stepper Motor & Driver & AC Transformer
This CNC kit includes:
3 x 34HS39-6004S: S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
3 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR800-A70-A220: 800VA Single-phase Square Control Transformer 220VAC to 3 x 70VAC ..
C$292.18
Hot
Model: CL57T-V41
This CL57T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and ..
C$52.77
