-2-200x160w.jpg "External (Acme) Linear Stepper Motor")
Hot
Model: 23HS45-4204D-E1000
Motor Specification
Manufacturer Part Number: 23HS45-4204D-E1000
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3.0Nm(424.83oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.82ohms
Inductance: 3.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 57 x 57mm
Bod..
C$53.31
Model: DM480AI
The DM480AI has built with a pulser already, you can control two Max current 8.4A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction sepe..
C$90.49
Brand: Leadshine
Model: DM542
The DM542 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA17, 23 and 24 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
C$68.42
Model: 23HS45-4204-ME1K
This nema 23 closed loop stepper motor with torque of 3Nm(424.83oz.in). The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electrical S..
C$51.03
Model: 1-DM556T-23HS45
This CNC kit included:
1 x DM556T: Digital Stepper Drive 1.8~5.6A 20-50VDC
1 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC
Motor Specification
Manufacturer Part Number: 23HS45-4204S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg ..
C$55.26
Model: 1-DM860I-34HS31
This CNC kit included:
1 x DM860I: Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive
1 x 34HS31-6004S: Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
Motor Specification
Manufacturer Part Number: 34HS31-6004S
Number of phase: 2..
C$74.37
Brand: Leadshine
Model: DM556
The DM556 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA17, 23 and 24 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
C$79.46
Model: 24E1K-30
Electrical Specification
Manufacturer Part Number: 24E1K-30
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3Nm(424.83oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.45ohms
Inductance: 1.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size: ..
C$68.32
Model: 1-DM860I-34HS45
This CNC kit included:
1 x DM860I: Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive
1 x 34HS45-6004S: S Series Nema 34 Stepper Motor 8.2Nm(1161.45oz.in) 14mm Key-way Shaft
Motor Specification
Manufacturer Part Number: 34HS45-6004S
Number Of Phase: 2
Step Angle..
C$83.66
Model: DM422IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–2.2A and an operating voltage of 18–36VDC, making it ideal for Nema 11, 14, 17 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
C$42.03
Hot
Model: DM556RS
This is Modbus RS485 stepper driver 0.1-5.6A 24-48VDC for Nema 17, 23, 24 stepper motor.DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional co..
C$105.94
Model: 24HS34-5004D-E1000
Electrical Specification
Manufacturer Part Number: 24HS34-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3.0Nm(424.83oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.52ohms± 10%
Inductance: 2.1mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
C$49.95
