Hot
Model: CL57T-V41
This CL57T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and ..
C$53.86
Model: 34HS46-6004D-E1000
Electrical Specification
Manufacturer Part Number: 34HS46-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 9.0Nm(1274.5oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.40ohms± 10%
Inductance: 3.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
C$75.79
Model: CL57TE
The CL57TE stepper driver offers significant advantages with its wide 5V-24V control signal compatibility, eliminating the need for manual voltage switching. It features intelligent auto-adjusting output current that can be configured via software without manual intervention. The package includes ..
C$47.46
Model: 3-DM860Y-TR120
This CNC kit includes:
3 x 34HS59-6004S: S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
3 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR800-A70-A220: 800VA Single-phase Square Control Transformer 2..
C$346.72
Hot
Model: CL57T
This closed-loop stepper driver 0-8.0A 24-48VDC for Nema 17, 23, 24 stepper motor offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fu..
C$50.85
Model: 3-DM542T-S30
This CNC kit includs:
3 x DM542T: Digital Stepper Driver 1.0-4.5A 18-50VDC for Nema 17, 23, 24 Stepper Motor
3 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
1 x LE-400-36: 400W 36V 11A 115/230V Switching Power Supply
Driver Specification
Pul..
C$189.31
Model: 34HS59-6004D-E1000
Electrical Specification
Manufacturer Part Number: 34HS59-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 12.0Nm(1699.34oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.53ohms± 10%
Inductance: 4.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificati..
C$92.62
Hot
Model: CL86Y
This Y Series closed loop stepper driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than t..
C$58.82
Model: CL86Y-V20
The CL86Y-V20 is an upgraded version of the CL86Y, featuring a 5V/24V logic voltage selector and an RS232 debugging port replacing the USB port. This Y Series closed-loop stepper driver supports 0–8.5A and operates at 20–80VAC / 30–110VDC, designed for Nema 34 stepper motors.
Utilizing next-genera..
C$58.43
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
C$158.94
Model: 3-DM860I-S80
This CNC kit included:
3 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
3 x 34HS39-6004S: Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
3 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
Motor Specification
Manufacturer ..
C$318.36
Hot
Model: CL86T-V41
This CL86T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive..
C$68.54
