DRV8825 Bipolar Stepper Motor Driver with On-Chip 1/32 ...
DRV8825 ACTIVE The device has two H-bridge drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver block consists of N-channel power MOSFET's configured as full H-bridges to drive the motor windings.
Control I/F: STEP/DIR Approx. price(US$): | 1ku
Micro-stepping levels: 32 Vs(Max)(V): 45
Stepper Motor Driver IC - STMicroelectronics
ST's portfolio of STSPIN stepper motor drivers spans from relatively simple ICs with current control and phase generation to more complex solutions that ...
How to Choose the Right Driver IC for Stepper Motors - All About Circuits
Dec 12, 2018 - This article discusses features and functionality offered by integrated circuits that simplify the task of controlling a stepper motor.
LV8702V: PWM Current Control High-Efficiency Stepper Motor Driver
The LV8702V is a 2-channel Full-bridge driver IC that can drive a stepper motor driver, which is capable of micro-step drive and supports quarter step. Curren.
Brush DC and Stepper Drivers - Allegro MicroSystems
Our team offers extensive knowledge of DC and stepper requirements, ... See below for our offerings of Brush DC Motor Drivers, DC Motor Controllers and Brush ...
Stepper Motor Controller IC - Texas Instruments | DigiKey
Jun 25, 2009 - Texas Instruments' DRV8811 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment ...
Stepper Motor Drivers - Pololu
Our stepper motor drivers offer adjustable current control and multiple step resolutions, and they ... Driver chip: A4988, DRV8825, DRV8834, DRV8880, MP6500 ...
You've visited this page 3 times. Last visit: 3/12/19
Stepping Motor Drivers | Toshiba Electronic Devices & Storage ...
Stable and precise control make stepper motors sutiable for applications such as ... reducing the amount of heat generated by the motor driver IC and the motor.
Servo and Stepper Motor Driver - Infineon Technologies
Servo and Stepper Motor Driver are designed for DC motors in servo control ... Infineon's solution for driving stepper motors consists of several drivers capable to ...
Stepper Motors Controller IC
Stepper Motor chip generates control signals that can be used with for both Unipolar & Bipolar Stepper Motors with appropriate drivers like the L298 & L293.
Model: 34HE31-6004S
Electrical Specification
Manufacturer Part Number: 34HE31-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.8Nm(679.74oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.42ohms± 10%
Inductance: 3.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
C$41.43
Model: 34HS31-5504D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 34HS31-5504D
M..
C$47.95
Model: 34HE45-6004S
Electrical Specification
Manufacturer Part Number: 34HE45-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 8.2Nm(1161.22oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.51ohms± 10%
Inductance: 5.1mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
C$53.81
Model: 34HS46-5004D1
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 8.5Nm(1204oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 34HS46-5004D1
Mo..
C$48.26
Model: 34HE59-6004S
Electrical Specification
Manufacturer Part Number: 34HE59-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 12.0Nm(1699.34oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.7ohms± 10%
Inductance: 7.9mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
C$70.45
Showing 1 to 5 of 5 (1 Pages)