Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 23HP45-4204S
Electrical Specification Manufacturer Part Number: 23HP45-4204S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.88ohms± 10% Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
C$52.92
Model: 23HS22-1006S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5oz.in). Electrical Specification Manufacturer Part Number: 23HS22-1006S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0.9N..
C$23.16
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
C$49.24
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Hot
Model: 24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
C$49.24
Model: 3-24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
C$147.99
Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
Hot
Model: 24HS39-3008D
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
C$57.26
Dual Shaft Nema 23 Stepper Motor 4.2A 4Nm(566oz.in) 60x60x100mm 4 Wires
Hot
Model: 24HS39-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Elect..
C$58.89
Model: 24HP39-5004S
Electrical Specification Manufacturer Part Number: 24HP39-5004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 3.5Nm(495.74oz.in) Rated Current/phase: 5.0A Phase Resistance: 0.48ohms± 10% Inductance: 1.85mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification F..
C$62.13
Model: 24HS40-4204S
This is the strongest Nema 24 stepper CNC motor with a step angle of 1.8degrees and a size of 60x60x100mm. It has 4 wires, draws 4.2A per phase and has a holding torque of 4.2Nm(594.77oz.in). Electrical Specification Manufacturer Part Number: 24HS40-4204S Motor Type: Bipolar Stepper Step Angle:..
C$46.34
Model: 34HS25-5604S
This stepper motor with a 30mm long shaft and a motor size of 86x86x64mm is the shortest Nema 34 motor we have. It has 4 wires, each phase draws 5.6A, with a holding torque of 3.3Nm(467.32oz.in). Electrical Specification Manufacturer Part Number: 34HS25-5604S Motor Type: Bipolar Stepper S..
C$47.06
Model: 34HS26-2006D
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm(312oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 34HS26-2006D Motor Type: Unip..
C$46.71
Model: 34HS27-4004S
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 85.8x85.8x68mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.4Nm(481.48oz.in). Electrical Specification Manufacturer Part Number: 34HS27-4004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque..
C$46.92
Showing 169 to 180 of 205 (18 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments