Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 23HS45-4204S-RV
This motor has a torque of 3.0Nm(425oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly. Electrical Specification Manufacturer Part Number: 23HS45-4204S-RV Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/pha..
C$51.95
Model: 23HT22-5503S
Electrical Specification Manufacturer Part Number: 23HT22-5503S Number of phase: 3 Step Angle: 1.2deg Holding Torque: 1Nm(141.64oz.in) Rated Current/phase: 5.5A Phase Resistance: 0.45ohms Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame Size..
C$32.16
Model: 23HT32-5803S-C1
This is a 3-phase stepper motor with a rated current of 5.8A, a holding torque of 1.7Nm(240.79oz.in) and a timing belt pulley. Compared with 2-phase motors, 3-phase motors run more smoothly and reliably. It is widely used in textiles industry, lathe machines, medical equipmen, chemical industry and ..
C$48.24
Model: 24HP39-5004S
Electrical Specification Manufacturer Part Number: 24HP39-5004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 3.5Nm(495.74oz.in) Rated Current/phase: 5.0A Phase Resistance: 0.48ohms± 10% Inductance: 1.85mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification F..
C$65.48
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
C$48.24
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Hot
Model: 24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
C$48.24
Model: 3-24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
C$117.23
Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
Hot
Model: 24HS39-3008D
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
C$56.10
Showing 177 to 184 of 214 (27 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments