Hot
Model: 24HS39-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. The installation dimensions are the same as the conventional Nema 24 motor, with greater torque. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Elect..
C$57.70
Model: 17HS15-1684D-HG50-AR4
This Nema 17 geared motor is the Joint 3 motor in AR4 kit. It is integrated with a planetary gearbox of 50:1 gear ratio and a very thin and cost-effective magnetic incremental encoders with 3 channels and 1000PPR(4000CPR) resolution. It's also a good solution to applications that with limited space ..
C$123.76
Hot
Model: 23HS22-2804S-PG15
This Nema 23 stepper motor with 56mm body and 2.8A rated current, integrated a planetary gearbox of 15.3:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS22-2804S-PG15
Motor T..
C$79.45
Model: 17HS16-2004D-B025
Motor Specification
Manufacturer Part Number: 17HS16-2004D-B025
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.45Nm(63.74oz.in)
Rated Current/phase: 2.0A
Voltage: 2.20V
Phase Resistance: 1.1ohms
Inductance: 2.60mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 42 ..
C$67.14
Model: 23HS22-2904S-EGS50
This Nema 23 stepper motor comes with a holding torque of 1.20Nm(169.93oz.in) and features a 50:1 high-precision EG series planetary gearbox that guarantees a maximum backlash of only 15arcmin, ensuring repeatable and precise motion.
Designed for reliability in rigorous operating conditions, this..
C$131.70
Hot
Model: 23HS22-2804S-PG47
This Nema 23 stepper motor with 56mm body and 2.8A rated current, integrated a planetary gearbox of 46.656:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS22-2804S-PG47
Motor..
C$79.45
Model: 24HS40-4204S
This is the strongest Nema 24 stepper CNC motor with a step angle of 1.8degrees and a size of 60x60x100mm. It has 4 wires, draws 4.2A per phase and has a holding torque of 4.2Nm(594.77oz.in). Electrical Specification
Manufacturer Part Number: 24HS40-4204S
Motor Type: Bipolar Stepper
Step Angle:..
C$45.40
Hot
Model: 34HE31-6004S
Electrical Specification
Manufacturer Part Number: 34HE31-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.8Nm(679.74oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.42ohms± 10%
Inductance: 3.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
C$40.59
