Model: 23HS30-2694D
Electrical Specification
Manufacturer Part Number: 23HS30-2694D
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 1.85Nm(261.98oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.1ohms± 10%
Inductance: 5.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
C$27.43
New
Model: 11HS12-1004D-E1000-EGS10
This Nema 11 stepper motor provides a holding torque of 0.06Nm(8.5oz.in) and features a high-precision EG series gearbox with a 10:1 gear ratio, complemented by a 1000PPR(4000CPR) incremental optical encoder. It's an excellent choice for applications that require good accuracy and reliability at an ..
C$136.43
Model: 17HS19-0406S-PG14
This unipolar Nema 17 stepper motor with 48mm body and 0.4A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS19-0406S-PG1..
C$41.85
New
Model: 11HS12-1004D-E1000-EGS20
This Nema 11 stepper motor provides a holding torque of 0.06Nm(8.5oz.in) and features a high-precision EG series gearbox with a 20:1 gear ratio, complemented by a 1000PPR(4000CPR) incremental optical encoder. It's an excellent choice for applications that require good accuracy and reliability at an ..
C$147.97
Model: 17HS19-1684S-HG10
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 17HS19-1684S-HG10
Motor T..
C$72.63
Hot
Model: 23HS30-2694S
This Nema 23 stepper CNC motor has a step angle of 1.8degrees, size of 57x57x76mm, and draws 2.8A per phase. It has 4 wires and has a holding torque of 1.85Nm(261.98oz.in).Electrical Specification
Manufacturer Part Number: 23HS30-2694S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 1.8..
C$27.43
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification
Manufacturer Part Number: 23HS30-2804D
Motor Type: Bipolar Stepper
Step Angle:..
C$35.25
New
Model: 11HS12-1004D-E1000-EGS50
This Nema 11 stepper motor provides a holding torque of 0.06Nm(8.5oz.in) and features a high-precision EG series gearbox with a 50:1 gear ratio, complemented by a 1000PPR(4000CPR) incremental optical encoder. It's an excellent choice for applications that require good accuracy and reliability at an ..
C$147.97
