Used
-61 %
Model: SN-B-MB-USED
This brass screw nut works for Tr8x8mm Threaded Rod.
Product status note: the screw nut has minor appearance flaws.
..
C$8.21 C$3.17
New
-30 %
Model: CN-NMRVS50-G20-D19
The size of this gearbox is 110mmx110mm and the input shaft diameter is 19mm. This worm gearbox is designed for Nema 42 Stepper Motor or other 110mmx110mm size motor, the output shaft is offset by 90° from the drive shaft. Besides big cases, no gap structure of box means a maintenance-free that is..
C$83.24 C$58.27
New
Used
-39 %
Model: 24HS40-5004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 24HS40-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.0Nm(566.45oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.6ohms± 10%
Inductance: 2.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
C$54.57 C$33.09
-35 %
Model: US-NMRV40-G5-D14
The size of this gearbox is 86mmx86mm and the input shaft diameter is 14mm. This worm gearbox is designed for Nema 34 Stepper Motor or other 86mmx86mm size motor, the output shaft is offset by 90°from the drive shaft. Besides big cases, no gap structure of box means a maintenance-free that is herm..
C$73.02 C$47.76
Hot
-26 %
Model: CN-CL42T
CL42T is a closed loop stepper driver 0-3.0A 24-48VDC for Nema 11, 14, 17 stepper motor designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of based on its tens of years’ ..
C$50.85 C$37.83
Used
-55 %
Model: 34HS59-6004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 34HS59-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 12.0Nm(1699.34oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.53ohms± 10%
Inductance: 4.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificati..
C$92.62 C$41.74
-30 %
Brand: MEANWELL
Model: CN-SE-450-24
Features
Brand MEANWELL
24V DC 18.8A output
AC input voltage range: 180 ~ 264VAC
Rated power: 451.2W
AC input active surge current limiting
AC input range selected by switch
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC ball beari..
C$91.42 C$64.00
-33 %
Model: CN-FGF-36244500-G36
This is a standard 24 volt brushed DC gear motor, generating 7kg.cm of torque at 100rpm. It's a small, inexpensive motor suitable for low torque, high speed applications.
Combined with a 36 : 1 rectangular gearbox, this motor will provide greater efficiency, higher torque, and quieter motor operati..
C$30.93 C$20.57
New
-30 %
Model: CN-SGA37-33123000-G90
This is a standard 12volt brushed DC gear motor, generating 2kg.cm of torque at 24rpm. It's a small, inexpensive motor suitable for low torque, high speed applications.
Combined with a 90 : 1 spur gearbox, this motor will provide greater efficiency, higher torque, and quieter motor operation.
..
C$6.93 C$4.84
New
-30 %
Model: CN-SGC37-32125000-G90
This is a standard 12volt brushed DC gear motor, generating 3.5kg.cm of torque at 41rpm. It's a small, inexpensive motor suitable for low torque, high speed applications.
Combined with a 90 : 1 spur gearbox, this motor will provide greater efficiency, higher torque, and quieter motor operation.
..
C$10.37 C$7.27
New
-30 %
Model: CN-SGE37-36123000-G540
This is a standard 12 volt brushed DC gear motor, generating 50kg.cm of torque at 4.2rpm. It's a small, inexpensive motor suitable for low torque, high speed applications.
Combined with a 540 : 1 spur gearbox, this motor will provide greater efficiency, higher torque, and quieter motor operation.
..
C$11.07 C$7.76
-47 %
Model: CN-SGF25-24126000-G340
This is a standard 12volt brushed DC gear motor, generating 5kg.cm of torque at 14rpm. It's a small, inexpensive motor suitable for low torque, high speed applications.
Combined with a 340 : 1 spur gearbox, this motor will provide greater efficiency, higher torque, and quieter motor operation.
..
C$13.75 C$7.27
