-35 %
Model: CN-23HS22-2804-HG50-ME1K
Electrical Specification
Manufacturer Part Number: 23HS22-2804-HG50-ME1K
Motor Type: Bipolar Stepper
Step Angle: 0.036deg
Holding Torque without Gearbox: 102Ncm(144.44oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.8mH±20%(1KHz)
Gearbox Specifications
Gearbo..
C$199.50 C$129.68
-32 %
Model: CN-ST-JC08
Shaft: 6.0mm - 10.0mm
P/N: ST-JC08
Diameter: 20mm
Length: 30mm
Sleeve Material: Polyurethane
Body Material: Aluminum Alloy
This coupling can be replaced by MH2025-6-10.
..
C$8.24 C$5.56
Used
-45 %
Model: LS-AJ-250-USED
Specification
Manufacturer Part Number: LS-AJ-250
Material: Stainless steel
Screw diameter: 11mm
Lead of thread: 2mm
Length: 250mm
Product status note: the lead screw has minor appearance flaws.
This lead screw cannot be used for non-captive linear stepper motors.
..
C$10.69 C$5.88
-45 %
Model: CN-LS-MB-150
Specification
Manufacturer Part Number: LS-MB-150
Material: Stainless steel
Screw diameter: 8mm
Lead of thread: 8mm
Length: 150mm
This lead screw cannot be used for non-captive linear stepper motors.
..
C$8.21 C$4.51
-45 %
Model: CN-LS-MB-210
Specification
Manufacturer Part Number: LS-MB-210
Material: Stainless steel
Screw diameter: 8mm
Lead of thread: 8mm
Length: 210mm
This lead screw cannot be used for non-captive linear stepper motors.
..
C$8.21 C$4.51
-59 %
Model: CN-LS-AA-250
Specification
Manufacturer Part Number: LS-AA-250
Material: Stainless steel
Screw diameter: 5mm
Lead of thread: 2mm
Length: 250mm
This lead screw cannot be used for non-captive linear stepper motors.
..
C$14.24 C$5.88
-45 %
Model: CN-LS-MB-320
Specification
Manufacturer Part Number: LS-MB-320
Material: Stainless steel
Screw diameter: 8mm
Lead of thread: 8mm
Length: 320mm
This lead screw cannot be used for non-captive linear stepper motors.
..
C$12.95 C$7.12
-45 %
Model: CN-SN-TS-CC
This is a POM acrew nut for Tr3.5x0.6096mm threaded rod.
Lead Screw Material: POM
Lead/Revolution: 0.6096mm
Lead Screw Diameter: 3.5mm
..
C$8.21 C$4.51
-45 %
Model: CN-SN-TS-SM
This is a POM acrew nut for Tr6x1mm threaded rod.
Lead Screw Material: POM
Lead/Revolution: 1mm
Lead Screw Diameter: 6mm
..
C$12.33 C$6.78
-45 %
Model: CN-SN-TS-DB
This is a POM acrew nut for Tr8x4mm threaded rod.
Lead Screw Material: POM
Lead/Revolution: 4mm
Lead Screw Diameter: 8mm
..
C$12.33 C$6.78
Used
-45 %
Model: SN-B-MB-USED
This brass screw nut works for Tr8x8mm Threaded Rod.
Product status note: the screw nut has minor appearance flaws.
..
C$8.21 C$4.51
Hot
-26 %
Model: CN-CL42T
CL42T is a closed loop stepper driver 0-3.0A 24-48VDC for Nema 11, 14, 17 stepper motor designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of based on its tens of years’ ..
C$50.85 C$37.83
