-
Motors & Drivers
-
Linear Motion
-
Gearboxes
- Electrical
- Mechanical
-
New Product
New Categories Arrived in April
New Products Arrived in April
Product Categories
Stepper Motors
Servo & Brushless DC Motor(BLDC)
Linear Actuator & Linear Stepper Motor
-2-200x160w.jpg "External (Acme) Linear Stepper Motor")
-2-200x160w.jpg "External (Ball Screw) Linear Stepper Motor")
Gearboxes
DC Gear Motors & AC Motors
Electrical
..
..
..
..
..
Featured Products
Bestseller
Hot
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achie..
C$28.49
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 1000W motor and a single/three-phase 220V 1000W servo driver that supports P..
C$213.37
Hot
The NEMA 23 stepper motor has a rated current of 5.0A and a holding torque of 3.0Nm(424.83oz.in). With a step angle of 1.8 degrees and dimensions of 5..
C$21.21
Hot
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 400W motor and a single-phase 220V 400W servo driver that supports Pulse/RS4..
C$142.72
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 750W motor and a single-phase 220V 750W servo driver that supports Pulse/RS4..
C$168.75
Hot
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 400W motor and a single-phase 220V 400W servo driver that supports EtherCAT ..
C$162.47
New Products
New
Used – 90% New
-10 %
The size of this gearbox is 90 x 90mm and the input shaft diameter is 12.7mm. This high-precision planetary gearbox is belong to EG series gearbox, it..
C$154.40 C$138.95
New
This LKN60 series ball screw driven linear actuator offers a maximum horizontal payload of 30kg(66.14lb) and maximum vertical payload of 10kg(22.05lb)..
C$195.32
New
This LCB series mini electric cylinder is equipped with a Nema 23 stepper motor, featuring a rated current of 3.0A, a 12mm diameter ball screw with a ..
C$308.01
New
This LCB series mini electric cylinder is equipped with a Nema 17 stepper motor, featuring a rated current of 1.5A, a 12mm diameter ball screw with a ..
C$308.01
New
This LCB series mini electric cylinder is equipped with a Nema 14 stepper motor, featuring a rated current of 1.5A, a 8mm diameter ball screw with a 2..
C$339.60
New
This LCB series mini electric cylinder is equipped with a Nema 11 stepper motor, featuring a rated current of 1.0A, a 6mm diameter ball screw with a 1..
C$355.40
Specials
-27 %
T6 Series 400W 3000rpm 1.27Nm 17-bit AC servo products are cost-effective AC digital servo which is designed for position high accurate control, ..
C$320.67 C$235.09
-30 %
Package includes:
3 x 14HS17-0504S--Nema 14 Bipolar 1.8deg 23Ncm(32.6oz.in) 0.5A 7.5V 35x35x42mm 4 Wires
1 x 14HS10-0404S--Nema 14 Bipolar 1.8deg ..
C$50.46 C$35.32
-6 %
This is the dedicated component bundle specifically designed for the AXIOM Harness Tensioner open-source project. StepperOnline has combined these hig..
C$319.67 C$300.48
-31 %
This is a standard 110 volt brushed AC gear motor, generating 40kg.cm of torque at 8rpm. It's a small, inexpensive motor suitable for low torque, high..
C$34.60 C$23.98
-34 %
T6 Series 750W 3000rpm 2.39Nm 17-bit AC servo products are cost-effective AC digital servo which is designed for position high accurate control, ..
C$391.82 C$260.28
Hot
-26 %
CL42T is a closed loop stepper driver 0-3.0A 24-48VDC for Nema 11, 14, 17 stepper motor designed to solve the loss of step problem in open loop steppe..
C$49.82 C$37.06
What are people saying about us
I specifically asked them to pack the item carefully to prevent damage. Their packaging went above and beyond my expectations, and the item arrived safely without any issues. Highly recommend this seller.
Works perfectly!!! I replaced my old motor when it started acting up. This new one always stops exactly where it should. I’ve never seen it miss a step. Definitely worth the money!
Good length good price. Works as expected. It just a run of the mill cable. The make billions of these a month. Why would it differ from any of the other billions as stated by some of these reviewers.
The connection is solid and easy to use. The system performs really well, and it doesn’t get too hot even when driving the motor at its maximum allowed current.
Exactly as described, shipment arrived promptly and in perfect condition. Power this 6-channel DSP amplifier nicely.
Great seller super great deal and super fast shipping thanks again for everything!!!
