-
Motors & Drivers
- Linear Motion
- Gearboxes
- Electrical
- Mechanical
-
New Product
New Categories Arrived in February
..New Products Arrived in February
Product Categories
Stepper Motors
Servo & Brushless DC Motor(BLDC)
Linear Actuator & Linear Stepper Motor
-2-200x160w.jpg "External (Acme) Linear Stepper Motor")
-2-200x160w.jpg "External (Ball Screw) Linear Stepper Motor")
Gearboxes
DC Gear Motors & AC Motors
Electrical
..
..
..
..
Featured Products
Bestseller
Hot
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achie..
C$29.08
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 1000W motor and a single/three-phase 220V 1000W servo driver that supports P..
C$217.78
Hot
The NEMA 23 stepper motor has a rated current of 5.0A and a holding torque of 3.0Nm(424.83oz.in). With a step angle of 1.8 degrees and dimensions of 5..
C$21.65
Hot
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 400W motor and a single-phase 220V 400W servo driver that supports Pulse/RS4..
C$145.68
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 750W motor and a single-phase 220V 750W servo driver that supports Pulse/RS4..
C$172.24
Hot
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 400W motor and a single-phase 220V 400W servo driver that supports EtherCAT ..
C$165.83
New Products
New
This pre-wired, ultra-small size T-shaped EE-SX67 series sensor offers a output type of NPN and reliable sensing slot depth of 5mm. This photoelectric..
C$9.63
New
This pre-wired, ultra-small size grooved type EE-SX67 series sensor offers a output type of NPN and reliable sensing slot depth of 5mm. This photoelec..
C$9.63
New
Features
Brand MEANWELL
48VDC 12.5A output
Rated Power: 600W
Input Voltage Range: 80-264VAC/113-370VDC
150% Peak load @3s
Over voltage categor..
C$80.90
New
-6 %
This is the dedicated component bundle specifically designed for the AXIOM Harness Tensioner open-source project. StepperOnline has combined these hig..
C$326.28 C$306.70
New
This 1-meter male-to-bare-wire high-flex shielded signal cable is designed for devices with HDDB15 control ports. It can be used for the CN1 control p..
C$15.20
New
Specifications
Part No.: LM350-20B15R2
Power(W): 349.5
Vin(VAC): 90 - 132/180 - 264
Vin(VDC): 240 - 370
Vout(VDC): 15V
Iout: 23.3A
Efficiency(%..
C$30.06
Specials
New
-6 %
This is the dedicated component bundle specifically designed for the AXIOM Harness Tensioner open-source project. StepperOnline has combined these hig..
C$326.28 C$306.70
New
-30 %
This is a standard 12 volt brushed DC gear motor, generating 0.19kg.cm of torque at 656rpm. It's a small, inexpensive motor suitable for low torque, h..
C$15.91 C$11.14
-30 %
This is a standard 12 volt brushed DC gear motor, generating 0.27kg.cm of torque at 465rpm. It's a small, inexpensive motor suitable for low torque, h..
C$15.91 C$11.14
-30 %
This is a standard 12 volt brushed DC gear motor, generating 0.8kg.cm of torque at 138rpm. It's a small, inexpensive motor suitable for low torque, hi..
C$16.95 C$11.87
New
-30 %
This is a standard 12 volt brushed DC gear motor, generating 0.95kg.cm of torque at 116rpm. It's a small, inexpensive motor suitable for low torque, h..
C$16.95 C$11.87
-30 %
This is a standard 12 volt brushed DC gear motor, generating 1.1kg.cm of torque at 98rpm. It's a small, inexpensive motor suitable for low torque, hig..
C$16.95 C$11.87
What are people saying about us
This company is fantastic! I’ve ordered from another seller before, and they didn’t ship for over a month—no replies to my messages about where my order was or when it would be sent. But this seller is very easy to communicate with and highly professional. It was a truly pleasant transaction.
This little motor is a solid choice for our compact automation project. The gearbox provides a noticeable torque increase in a small package, which is exactly what we needed. It runs smoothly at lower speeds without any issues.
hi quality well packaged brand new! a great financial upgrade at a great price!! Everything looks great!! Partnered with a 5/1 planetary gear head theas will remain fast and strong for many years to come!!
Installed this NEMA 23 integrated servo on my small CNC retrofit. The setup was incredibly simple and straightforward. I'm highly impressed with its smooth, responsive motion and the solid holding torque. It delivers reliable power for my automation project, performing exactly as promised. A fantastic motor for the price.
Strong and reliable stepper motor. I am currently using this for a DIY pedal project. Holding torque is extremely strong for my application. Just make sure you are using a strong enough power supply.
These are the best value around.Okay, so tuning them is a royal pain I'll admit, but at a third of the price of the next most comparable servo, this things rock. The other person who reviewed these saying they have bad torque, simply didn't have them setup right. Power these with at least 48v 10 amps per motor and you want have a problem.
