-
Motors & Drivers
- Linear Motion
- Gearboxes
- Electrical
- Mechanical
-
New Product
New Categories Arrived in October
New Products Arrived in October
-2-200x160w.jpg "External (Acme) Linear Stepper Motor")
Product Categories
Stepper Motors
Servo & Brushless DC Motor(BLDC)
Linear Actuator & Linear Stepper Motor
-2-200x160w.jpg "External (Ball Screw) Linear Stepper Motor")
Gearboxes
DC Gear Motors & AC Motors
Electrical
..
..
..
..
Featured Products
Bestseller
Hot
This CNC kit includes:
1 x 23HS40-5004D-E1K-1M5: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)
1 x CL57Y..
C$72.31
Hot
This CNC kit includes:
1 x 23HS39-5004S: Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
1 x DM556Y: Y Series Di..
C$48.74
Hot
The NEMA 23 stepper motor has a rated current of 5.0A and a holding torque of 3.0Nm(424.83oz.in). With a step angle of 1.8 degrees and dimensions of 5..
C$21.65
Hot
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 400W motor and a single-phase 220V 400W servo driver that supports Pulse/RS4..
C$171.64
Hot
This CNC kit includes:
1 x 34HS59-6004D-E1K-1M5: S Series Nema 34 Closed Loop Stepper Motor 12.00Nm(1699.34oz.in)Encoder 1000PPR(4000CPR)
1 x CL86..
C$115.53
Hot
This is an A6 series AC servo motor and driver kit consisting of a 220VAC 400W motor and a single-phase 220V 400W servo driver that supports EtherCAT ..
C$194.71
New Products
New
Used
-53 %
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1..
C$27.02 C$12.65
New
This CNC kit includes:1 x 23HS40-5004D-E1K-1M5: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)1 x CL57Y-V20: ..
C$94.04
New
This CNC kit includes:4 x 23HS40-5004D-E1K-1M5: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)4 x CL57Y-V20: ..
C$338.31
New
This CNC kit includes:1 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)1 x CL57Y-V20: Y Series V2..
C$109.18
New
This CNC kit includes:4 x 24HS40-5004D-E1000: Nema 24 Closed Loop Stepper Motor 4.00Nm(566.45oz.in) Encoder 1000PPR(4000CPR)4 x CL57Y-V20: Y Series V2..
C$382.42
New
This CNC kit includes:4 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)4 x CL57Y-V20: Y Series V2..
C$378.88
Specials
Used
-29 %
This high-precision planetary gearbox is belong to EG series gearbox, it with gear ratio 100:1 and a maximum 20arc-min backlash. It's an excellent cho..
C$44.28 C$31.41
Used
-44 %
This professional CNC switching power supply 48V 350W 7.3A can be widely used in Industrial Automation and CNC Stepper/Servo System.
115V and 230V ca..
C$38.07 C$21.47
Used
-44 %
This professional 350W 60V 5.9A Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo System.
115V and 230V c..
C$38.07 C$21.47
-32 %
This is a 24V 101W brushless DC motor with a flange of Φ57mm. The built-in 51:1 round planetary gearbox delivers a rated torque of 11.42Nm(1617.20oz.i..
C$102.92 C$69.60
-32 %
This is a 24V 101W round brushless DC motor with a flange of Φ57mm. The built-in 100:1 round planetary gearbox delivers rated torque of 20.00Nm(2832.2..
C$102.92 C$69.60
Used
-52 %
The size of this gearbox is 90 x 90mm and the input shaft diameter is 14mm. This high-precision planetary gearbox is belong to EG series gearbox, it w..
C$88.28 C$42.54
What are people saying about us
I use a lot of stepper motors and I've never had an issue with these. They work well with every driver I've used them with and the threading and dimensions are always very accurate for installation in a variety of projects.
These hybrid steppers are noticeably smoother and almost twice as fast as my old ones. Much quieter too, and they handle stalls far better. A solid upgrade for performance.
Easy to set up and connect to the driver. more specs are available on the manufacturer website along with 3d models if you need to fit the motor in a custom designed project. The motor doesn't slip and isn't too loud when running at 16 microsteps. The noise is noticeable in a computer science lab environment at speeds around 1500+ pulses/second but is almost silent below that. The driver is completely silent to my ears.
I have a FoxAlien CNC, Masuter Pro. I swapped out to these steppers when one of the factory steppers died after 2 years of hard work. Decided to step up and double the torque. These fit and connected with no issues. So much stronger than the originals (25nm vs 48nm) I also changed out the 2mm belts to 3mm belts. HUGE improvement.
Not much to say other than it worked right out of the box, zero issues. Have bought like 10 steppers from this seller and have never had a problem. Thought I’d finally leave a review incase someone else is on the fence.
I'm using and these are pretty quiet. Good response time, these are as good as more expensive options.
